123inkt DR-L4, User Manual

Page: 67 / 74

First use
− Never insert metallic objects (e.g. paper clips, staples etc.) or
objects other than laminating pouches which are intended for
this laminator into the laminating pouch infeed slot.
− The laminator has vents. Never cover them with other objects
such as magazines, blankets or similar.
− Never fill the laminator with liquid.
− Never attempt to clean the laminator by immersing it in water
and do not use a steam cleaner to clean it. Otherwise, you
could damage the laminator.
First use
Checking the laminator and package contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointy object, you may quickly damage the
laminator.
– Be very careful when opening the packaging.
1. Take the laminator out of the packaging.
2. Check to make sure that the delivery is complete.
3. Check whether the laminator or the individual parts exhibit damage. If this is
the case, do not use the laminator. Contact the manufacturer at the e-mail
address specified on the warranty card.
Setting up the laminator
1. Position the laminator so that there is enough space to insert a laminating
pouch. Do not position the laminator directly in front of a wall or other objects.
2. Connect the power plug to a properly installed socket (220–240 V~, 50 Hz).
11