22
123electric
The Netherlands
E-mail: [email protected]
www.123electric.eu
End Board
To b
Mount hole for the 'plus'-pole of the cell.
To battery -
Solder a wire on the solder pad and connect this wire to the minus (-)
side of the cell.
Info LED
Indicator LED. Flashes when BMS data is received. Continuous ON
when the balance mode is active.
Load status LED
Flashes when load relay is active (every 5 seconds)
Charge status LED
Flashes when charge relay is active (every 5 seconds)
BMS IN
Interconnection connector for the data link to the previous cell
board.
Button
Button for Bluetooth configuration and password reset.
Charge relay contacts
Relay for cutting off chargers, MPPT, solar chargers etc. In case of full
batteries.
Load relay contacts
Relay for cutting off consumers like inverters, etc. In case of empty
batteries.
Extended data output
Data output for external modules.
