5
USING THE BUILT-IN VIEDO RECORDER
TURNING ON AND VIDEO RECORDING
• Open the plug and insert the SD memory card as shown in Pic. 2.
• Activate the device by pressing the button “ON” (2).
• Adjust the device following the instructions in the section “OPERATION”.
• Turn on the video recorder by pressing the button “REC” (7)-the blue LED indicator (9) will light
up. The video recorder will be ready to record in about five seconds. To start recording, press the
“REC” button (7)-the blue LED indicator will start blinking. The indicators can also be seen in the
field of view.
• Push the “REC” button (7) to stop recording. The blue LED indicator (9) will stop blinking. Press
and hold the “REC” button to turn off the recorder, the blue LED indicator will go off.
OPERATION OF LED INDICATORS
The left LED (8) shows operational status of the unit.
The right LED (9) shows operational status of the video recorder
LEFT LED
Lights green
The unit is “ON”
Lights yellow
The unit is “ON” with IR
Blinking green or yellow
Low batteries
Right LED
Lights blue
The video recorder is “ON”
Blinking blue
The recorder is active
Blinking red (when video recorder is
started, blue LED indicator lights up,
but 3-5 sec starts blinking red)
Memory card is full
Lights red
Memory card is not installed
