10ZiG Technology Limited 310 CE, Basic Operation Manual

Page: 4 / 30

4
NOTE: The battery packs shipped with your device may be low in power - please use the AC-DC
adapter with the 310 CE when setting up the device for the first time to fully charge the internal
battery pack. You may charge the external battery pack with it attached to the 310 CE , or with the
optional external battery charger kit.
NOTE: When the battery pack(s) is (are) charging, the blue-colored Battery LED should blink
slowly. If plugging in the AC-DC adapter does not trigger this blinking activity and the LED stays
dark, the battery pack(s) may have been substantially drained. Try unplugging/replugging the AC-
DC adapter to the
310 CE a few times to activate the charging process.
NOTE: To conserve power, use (push and quick release) the Power Button to put the device in
“Standby” mode while not in use. Pushing briefly on the same button will wake up the system
within seconds.
NOTE: Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the device--this
form of hardware shutdown is intended to be a means of recovery from device lockups, and not as
normal operation.
Start Up
If the power up (from Standby or otherwise) is successful, the appropriate interface will be dis-
played after a launch sequence of several seconds. The wireless LAN connection may take 10-15
seconds to be established.
Configuring the 310 CE
The device may be configured using the utilities and methods dictated by the software operating
system. The
310 CE should be configurable for various properties such as user profiles, network
features, and several system elements.
Changes to the 310 CE must be saved using the Save Settings option in the control panel or when
the unit is rebooted they will be lost.
Access the User Control Panel by selecting Start - > Settings -> Control Panel -> Save Settings
and check to Save Current Settings.