10ZiG Technology Limited 310 CE, Basic Operation Manual

Page: 11 / 30

11
The connection will appear in the connection manager, as an ICON on the desktop with the title
Emulator.
To modify the connection, highlight the connection name and select edit.
To change startup options select the connection and select starup at the bottom of the Display Ses-
sion Properties
Display Session Properties - Connection Tab
Connection tab allows for changes to the host name/IP address and the port number. Also allows
for session changes such as connection name, device name and device type. For advanced
options, select Advanced options....
Enable Automatic reconnection - when enabled and the network connection is lost the unit
attempts to reconnect the session - this works best when the connection between the unit and the
host is local and does not go through a router.
Enabling Keep Alive each (sec) causes the unit to send a ping periodically to the AS/400 thus
keeping the connection alive even when the unit is idle. Depending on the router type you may
need to change the type to Telnet NOP.