101VOICE IP3667, Quick Installation Manual

Page: 7 / 13

7
Front Panel Main Part of Intercom Rain Shade Back Panel
Figure 1 Three Major Parts of
IP3667
Step 1: Installation preparation
A. Check the following contents:

Hex wrench x 1

RJ45 plugs x 2 (1 spare)

TA5 x 40mm screws x 4

35mm screw anchors x4
B. Tools that may be required:

Hex wrench

Phillips screwdriver (Ph2 or Ph3), hammer, RJ45 crimper

Electric impact drill with an 6mm drill bit
Step 2: Drilling
Figure 2 Wall Mounting
A. Place the mounting template with dimensions on the surface of a wall in
the
desired flat position.
B. Use an electric drill to drill the 4 holes marked on the mounting template. It is recommended to drill
about 50mm deep. Remove the template when finish
ed
drilling.
C. Push or hammer screw anchors into the drilled holes.
IP 3667
3. Installation