5
Power and Electric-lock Connector
1
2
3
4
5
6
7
+DC12V
VSS
NC
COM
NO
S-IN
S-OUT
12V DC Input
Electric-lock switch
Indoor switch
JP1 Jumper
There are two
power supply
modes for electric-lock as shown in the picture below.
(The default is “
Passive Mode:
”).
Passive Mode:
When the electric-lock starting current is more than 12V/650mA,
you must
use the
external drive mode, the electric lock interface for short circuit output control.
Active Mode :
When the electric-lock starting current is less than 12V/650mA,
you
can use the internal
drive mode, the electric lock interface is 12V DC output.
Jumper in passive mode
Jumper in active mode
IP3667
Network Connector
