100FIT 190A, Owner'S Manual

Page: 10 / 21

STEP 5
Insert the sensor wire (28) with a supportive hard wire into the console support post (8) and take the
sensor wire (28) out. Finally you can remove the supportive hard wire away. Then fix the console
support post (8) on the main frame (1) tightly with flat washers (16) & bolts (15) by hex wrench (32).
Fix the bottle holder (13) on the main frame tightly with cross screws (14) by multifunction spanner (33).
STEP 6
--Install 4pieces AA batteries properly.
--Connect the wire on the console (9) together with the sensor wire (28) properly, and then fix the console
on the plate of the console support post (8) tightly with cross screws (29) by multifunction spanner.