Chapter 23 Voice
VMG5313-B10A/-B30A Series User’s Guide
269
Apply To Phone
Select a phone port on which you want to make or receive phone calls for this
SIP account.
If you map a phone port to more than one SIP account, there is no way to
distinguish between the SIP accounts when you receive phone calls. The VMG
uses the most recently registered SIP account first when you make an outgoing
call.
If a phone port is not mapped to a SIP account, you cannot receive or make any
calls on the phone connected to this phone port.
more/less
Click
more
to display and edit more information for the SIP account. Click
less
to display and configure the basic SIP account settings.
URI Type
Select whether or not to include the SIP service domain name when the VMG
sends the SIP number.
SIP
- include the SIP service domain name.
TEL
- do not include the SIP service domain name.
Voice Features
Primary
Compression Type
Secondary
Compression Type
Third
Compression Type
Select the type of voice coder/decoder (codec) that you want the VMG to use.
G.711 provides high voice quality but requires more bandwidth (64 kbps). G.711
is the default codec used by phone companies and digital handsets.
•
G.711a
is typically used in Europe.
•
G.711u
is typically used in North America and Japan.
G.726-24
operates at
24
kbps.
G.726-32
operates at
32
kbps.
G.722
is a 7 KHz wideband voice codec that operates at 48, 56 and 64 kbps. By
using a sample rate of 16 kHz, G.722 can provide higher fidelity and better audio
quality than narrowband codecs like G.711, in which the voice signal is sampled
at 8 KHz.
The VMG must use the same codec as the peer. When two SIP devices start a SIP
session, they must agree on a codec.
Select the VMG’s first choice for voice coder/decoder.
Select the VMG’s second choice for voice coder/decoder. Select
None
if you only
want the VMG to accept the first choice.
Select the VMG’s third choice for voice coder/decoder. Select
None
if you only
want the VMG to accept the first or second choice.
Speaking Volume
Control
Select the loudness that the VMG uses for speech that it sends to the peer
device.
-12
is the quietest, and
12
is the loudest.
Listening Volume
Control
Select the loudness that the VMG uses for speech that it receives from the peer
device.
-12
is the quietest, and
12
is the loudest.
Enable G.168
(Echo
Cancellation)
Select this if you want to eliminate the echo caused by the sound of your voice
reverberating in the telephone receiver while you talk.
Enable VAD
(Voice Active
Detector)
Select this if the VMG should stop transmitting when you are not speaking. This
reduces the bandwidth the VMG uses.
Call Features
Table 109
VoIP > SIP > SIP Account > Add new accoun/Edit (continued)
LABEL
DESCRIPTION
Summary of Contents for VMG5313-B10A
