Chapter 11 Network Address Translation (NAT)
VMG5313-B10A/-B30A Series User’s Guide
193
11.8 The Sessions Screen
Use this screen to limit the number of concurrent NAT sessions a client can use. Click
Network
Setting > NAT > Sessions
to display the following screen.
Figure 85
Network Setting > NAT > Sessions
The following table describes the fields in this screen.
11.9 Technical Reference
This part contains more information regarding NAT.
Local End IP
Enter the ending Inside Local IP Address (ILA). If the rule is for all local IP addresses, then
this field displays 0.0.0.0 as the Local Start IP address and 255.255.255.255 as the Local
End IP address. This field is blank for
One-to-One
mapping types.
Global Start IP
Enter the starting Inside Global IP Address (IGA). Enter 0.0.0.0 here if you have a dynamic
IP address from your ISP. You can only do this for the
Many-to-One
mapping type.
Global End IP
Enter the ending Inside Global IP Address (IGA). This field is blank for
One-to-One
and
Many-to-One
mapping types.
Set
Select the number of the mapping set for which you want to configure.
OK
Click
OK
to save your changes.
Cancel
Click
Cancel
to exit this screen without saving.
Table 63
Address Mapping: Add/Edit (continued)
LABEL
DESCRIPTION
Table 64
Network Setting > NAT > Sessions
LABEL
DESCRIPTION
WAX NAT
Session Per
Host
Use this field to set a limit to the number of concurrent NAT sessions each client host can
have.
If only a few clients use peer to peer applications, you can raise this number to improve
their performance. With heavy peer-to-peer application use, lower this number to ensure no
single client uses too many of the available NAT sessions.
Apply
Click this to save your changes on this screen.
Cancel
Click this to exit this screen without saving any changes.
Summary of Contents for VMG5313-B10A
