Prestige 100WH Quick Start Guide
15
Chapter 4
Windows NT Quick Start
This chapter shows you the step-by-step instructions to configure your Windows NT
workstations for Internet access.
4.1 TCP/IP Installation
You must first install TCP/IP protocol on each Windows NT workstation before you can use it
to access the Internet. If you have already installed TCP/IP, skip to the TCP/IP Configuration
section on page 15; otherwise, follow these steps:
Step 1.
From the
Start Menu
, select
Settings
then open
Control Panel
.
Step 2.
Double-click the
Network
icon to open the
Network
control panel.
Step 3.
Select the
Protocols
tab, then click the
Add…
button.
