ZyXEL Communications ZYWALL 2 WG Скачать руководство пользователя страница 497

Страница: 497 / 784

Chapter 26 Logs Screens

ZyWALL 2WG User’s Guide

497

Budget counters are reset,
budget control is resumed.

The ZyWALL restarted budget calculation from 0 after resetting

the existing statistics.

Budget control is resumed.

The ZyWALL kept the existing budget control statistics and

continue a counting.

Budget control is disabled.

Budget control is deactivated for the user account of the

installed 3G card on the ZyWALL.

Skip 3G SIM authentication
because 3G configuration is
not set.

The ZyWALL skiped SIM card authentication because the PIN

code is not specified or SIM card authentication is disabled.

3G SIM authentication
failed because of no
response from SIM card.

SIM card authentication failed because the ZyWALL received a

SIM busy message three times when querying for the card

status.

3G card has no response,
card is restarted.

The card was reset due to no response from the card for a

period of time.

3G SIM card PIN code is
incorrect.

The specified PIN code does not match the inserted GSM 3G

card.

The 3G card is not
activated.

The user account of the 3G card is not activated.

3G Modem is locked.

The internal modem on the inserted 3G card is blocked.

SIM card not inserted or
damaged.

There is no SIM card in the inserted GSM 3G card or the SIM

card is damaged.

3G connection has been
dropped - %s.

The 3G connection has been dropped due to the specific

reason, such as idle timeout, manual disconnection, failure to

get an IP address, switching to WAN 1, ping check failure,

connection reset, and so on.

3G signal strength is
refreshed (%d dBm).

The ZyWALL updated the 3G network signal strength

indication.

Warning: (%IMSI% or %ESN%)
Over time budget! (budget =
%CONFIGURED_BUDGET% hours,
used = %USED_VOLUME%(2
decimals) hours).

This shows that the preconfigured time budget was exceeded.

This also displays the IMSI of the SIM card in an inserted GSM

3G card or the ESN of the inserted CDMA 3G card and the 3G

connection’s usage time in hours.

Warning: (%IMSI% or %ESN%)
Over %THRESHOLD%% of time
budget (%REMAIN_BUDGET%(2
decimals) hours remain in
%CONFIGURED_BUDGET% hours
budget).

This shows that the specified percentage of the time budget

was exceeded. This also displays the IMSI of the SIM card in

an inserted GSM 3G card or the ESN of the inserted CDMA 3G

card and the amount of time (in hours) the 3G connection can

still be used.

Table 171

3G Logs (continued)

LOG MESSAGE

DESCRIPTION

Содержание ZYWALL 2 WG

















































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ZYWALL 2 WG

Отзывы:

Бренды по названию

Популярные бренды

ZyXEL Communications ZYWALL 2 WG, Руководство пользователя

Результаты поиска

Содержание ZYWALL 2 WG

Отзывы:

Бренды по названию

Популярные бренды