ZyXEL Communications ZyWALL 10/10, Руководство пользователя

Страница: 210 / 342

ZyWALL 10/10 II/50 Internet Security Gateway
19-4 SNMP
Figure 19-2 Menu 22 — SNMP Configuration
The following table describes the SNMP configuration parameters.
Table 19-2 SNMP Configuration Menu Fields
FIELD DESCRIPTION DEFAULT
Get
Community Enter the Get Community , which is the password for the incoming Get-
and GetNext- requests from the management station.
public
(default)
Set Community Enter the Set Community , which is the password for incoming Set-
requests from the management station.
public
(default)
Trusted Host If you enter a trusted host, your ZyWALL will only respond to SNMP
messages from this address. If you leave the field set to 0.0.0.0
(default), your ZyWALL will respond to all SNMP messages it receives,
regardless of source. 0.0.0.0
(default)
Trap:
Community Enter the trap community, which is the password sent with each trap to
the SNMP manager. public
(default)
Trap:
Destination Enter the IP address of the station to send your SNMP traps to. 0.0.0.0
(default)
Once you have completed filling in Menu 22 - SNMP Configuration , press [ENTER] at the message
“Press ENTER to Confirm” to save your configuration, or press [ESC] to cancel.
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: