ZyXEL Communications XGS1210-12 Скачать руководство пользователя страница 29

Страница: 29 / 82

Chapter 4 Web Configurator

XGS1210-12 / XGS1250-12 User’s Guide

4.5 Switch Lockout/Resetting the Switch

You could block yourself (and all others) from managing the Switch if you remove all ports from VLAN1
and you do not configure other VLAN groups.

Note: Be careful not to lock yourself and others out of the Switch.

Make sure to log out of the Switch from a computer before logging in again on another

computer.

If you forget the administrator password or cannot access the Web Configurator, you will need to use
the

RESET

button at the front panel of the Switch to reset it back to the factory defaults.

This means that you will lose all configurations that you had previously and the password will be reset to
“1234”. IP address will also be reset to 192.168.1.3.

Make sure the

PWR/SYS

LED is on (not blinking).

To set the device back to the factory default settings, press the

RESET

button for more than 6 seconds or

until the

PWR

SYS

LED begins to blink and then release it. When the

PWR

SYS

LED begins to blink, the

defaults have been restored and the device restarts.

4.6 Logging Out of the Web Configurator

Click the logout icon

in a screen to exit the Web Configurator. You have to log in with your password

again after you log out. This is recommended after you finish a management session for security reasons.

Note: You are automatically logged out of the Web Configurator after 5 minutes of inactivity.

Содержание XGS1210-12



















































































Результаты поиска

Содержание XGS1210-12

Отзывы:

Бренды по названию

Популярные бренды

ZyXEL Communications XGS1210-12, Руководство пользователя

Результаты поиска

Содержание XGS1210-12

Отзывы:

Бренды по названию

Популярные бренды