ZyXEL Communications WX3310-B0, Руководство пользователя

Страница: 75 / 118

Chapter 11 AP Connection (Repeater Mode)
WX3310-B0 User’s Guide
75
C
HAPTER
11
AP Connection (Repeater
Mode)
11.1 Overview
This chapter discusses how to establish a wireless connection between your WX3310 and another AP or
wireless network when the WX3310 is in repeater mode. It allows you to connect to and/or extend the
existing wireless network. The following figure provides an example of two wireless networks connected
together.
Use these screens to choose an access point that you want the WX3310 to connect to. You should know
the security settings of the target AP.
Note: The fields and buttons in this screen is not available if the WX3310 is in AP mode.
11.2 What You Can Do in this Chapter
• Use the Station screen to manually enter the SSID and security settings of the AP to which you want
the WX3310 to connect, see Section 11.3 on page 75 .
• Use the AP List screen to scan the wireless networks in the WX3310’s area. You can also select an AP
from the list and enter its WiFi password to connect the wireless network, see Section 11.4 on page 76
• Use the WPS screen to enable/disable WPS, view or generate a new PIN number, see Section 11.5 on
page 78 .
11.3 Station Screen
Use this screen to manually enter the SSID and security settings of the AP to which you want the WX3310
to connect. This screen allows you to set a profile so that the WX3310 will automatically try to connect to
the AP specified in the profile each time the WX3310 in Repeater mode is turned on.
Click Networking > AP Connection > Station in repeater mode to open this screen.