background image

 Appendix C Legal Information

WX3310-B0 User’s Guide

113

List of national codes

Safety Warnings

• Do not use this product near water, for example, in a wet basement or near a swimming pool.

• Do not expose your device to dampness, dust or corrosive liquids.

• Do not store things on the device.

• Do not obstruct the device ventilation slots as insufficient airflow may harm your device. For example, do not place the device in an 

enclosed space such as a box or on a very soft surface such as a bed or sofa.

• Do not install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning.

• Connect ONLY suitable accessories to the device.

• Do not open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY qualified 

service personnel should service or disassemble this device. Please contact your vendor for further information.

• Make sure to connect the cables to the correct ports.

• Place connecting cables carefully so that no one will step on them or stumble over them.

• Always disconnect all cables from this device before servicing or disassembling.

• Do not remove the plug and connect it to a power outlet by itself; always attach the plug to the power adaptor first before connecting it to 

a power outlet.

• Do not allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor 

or cord.

• Please use the provided or designated connection cables/power cables/ adaptors. Connect it to the right supply voltage (for example, 

110V AC in North America or 230V AC in Europe). If the power adaptor or cord is damaged, it might cause electrocution. Remove it from the 

device and the power source, repairing the power adapter or cord is prohibited. Contact your local vendor to order a new one.

• Do not use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning.

• CAUTION: Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instruction. Dispose them at 

the applicable collection point for the recycling of electrical and electronic devices. For detailed information about recycling of this 

product, please contact your local city office, your household waste disposal service or the store where you purchased the product.

• The following warning statements apply, where the disconnect device is not incorporated in the device or where the plug on the power 

supply cord is intended to serve as the disconnect device,
- For permanently connected devices, a readily accessible disconnect device shall be incorporated external to the device;
- For pluggable devices, the socket-outlet shall be installed near the device and shall be easily accessible.

Environment Statement

ErP (Energy-related Products) 

Zyxel products put on the EU market in compliance with the requirement of the European Parliament and the Council published Directive 2009/

125/EC establishing a framework for the setting of ecodesign requirements for energy-related products (recast), so called as "ErP Directive 

(Energy-related Products directive) as well as ecodesign requirement laid down in applicable implementing measures, power consumption has 

satisfied regulation requirements which are:
• Network standby power consumption < 8W, and/or

• Off mode power consumption < 0.5W, and/or

• Standby mode power consumption < 0.5W.
(Wireless setting, please refer to "Wireless" chapter for more detail.)

European Union - Disposal and Recycling Information

The symbol below means that according to local regulations your product and/or its battery shall be disposed of separately from domestic 

waste. If this product is end of life, take it to a recycling station designated by local authorities. At the time of disposal, the separate collection of 

your product and/or its battery will help save natural resources and ensure that the environment is sustainable development.

COUNTRY

ISO 3166 2 LETTER CODE

COUNTRY

ISO 3166 2 LETTER CODE

Austria

AT

Liechtenstein

LI

Belgium

BE

Lithuania

LT

Bulgaria

BG

Luxembourg

LU

Croatia

HR

Malta

MT

Cyprus

CY

Netherlands

NL

Czech Republic

CZ

Norway

NO

Denmark

DK

Poland

PL

Estonia

EE

Portugal

PT

Finland

FI

Romania

RO

France

FR

Serbia

RS

Germany

DE

Slovakia

SK

Greece

GR

Slovenia

SI

Hungary

HU

Spain

ES

Iceland

IS

Switzerland

CH

Ireland

IE

Sweden

SE

Italy

IT

Turkey

TR

Latvia

LV

United Kingdom

GB

Содержание WX3310-B0























































































































Отзывы: