Chapter 9 Monitor
WAP6804 User’s Guide
56
The following table describes the labels in this screen.
9.7 Multicast Monitor
Go to
Monitor > Multicast Monitor
. Traditionally, IP packets are transmitted in one of either two ways -
Unicast (1 sender to 1 recipient) or Broadcast (1 sender to everybody on the network). Multicast delivers
IP packets to just a group of hosts on the network. This screen shows a summary of the multicast group IP
addresses.
Figure 28
Monitor > Multicast Monitor
The following table describes the labels in this screen.
Table 16 Monitor > MBSS Monitor
LABEL
DESCRIPTION
SSID
This shows the name for each BSS.
Broadcast
This shows the broadcast status of a specific MBSS. It shows 0 for
Disable
and 1 for
Enable
.
Association
This shows the number of devices connected to each BSS.
Detail
Click this button and a summary table describing the BSS is displayed under the
MBSS
Summary
table.
Association Table
The table displays after you click the
Detail
button.
Access Point
This shows the SSID name for each BSS.
RSSI (dbm)
This shows the RSSI (Received Signal Strength Indicator) of the wireless connection.
Rx Bytes
This shows the number of bytes that have been received by the connected client.
Tx Bytes
This shows the number of bytes that have been transmitted by the connected client.
BW
This shows the wireless bandwidth allowed for the connected wireless clients.
Time Associated
This shows the total amount of time (in seconds) the client has been associated with the BSS.
Refresh
Click this button to refresh the status of the MBSS.
Table 17 Monitor > Multicast Monitor
LABEL
DESCRIPTION
Multicast IP
This field displays the multicast group IP address.
Interface
This field displays the interface that belongs to the multicast group.
Refresh
Click this button to refresh the status of the WDS.
Содержание WAP6804
Страница 9: ...9 PART I User s Guide...
Страница 49: ...49 PART II Technical Reference...
Страница 52: ...Chapter 9 Monitor WAP6804 User s Guide 52 Figure 24 Monitor Wireless Monitor Downlink...