ZyXEL Communications VSG-1200 V2, Руководство пользователя

Страница: 91 / 282

VSG-1200 V2 User’s Guide
91 Chapter 10 Billing
10.2 PMS (Property Management System)
Many hotels use a PMS device to perform in-room billing for services (such as room services,
mini-bar, pay-per-view TV or telephone) that the guests use.
With PMS, the VSG allows subscribers to purchase additional time units online. In addition,
subscribers can select from a number of different billing plans.
To use PMS for billing, first connect the VSG to a PMS device using the PMS port (refer to
Chapter 2 on page 38 ), then configure the PMS settings on the VSG.
10.2.1 Port-Location Mapping
When you activate port-location mapping and PMS on the VSG, two charge modes are
available: per room and per subscriber.
Select Based on Room when location is important. If a subscriber disconnects from one
location and reconnects in another location, the VSG prompts for the user name and password
again.
Select Based on Subscriber to allow a subscriber to freely move between different locations
without prompting for user name and password.
10.2.2 PMS Configuration
Click System Setting , Billing and click the PMS Configuration link to display the screen as
shown next.
Service Type Select Private Service to set the VSG to assign private IP addresses to the
subscribers connected on the LAN.
Select
Public Service to set the VSG to assign public IP addresses to the
subscribers connected on the LAN. You must have more than one public IP address
from your ISP.
Configure private and public DHCP IP address assignment in the
Server screen.
Refer to Section 7.1.1 on page 70 for more information.
Reset Click Reset to restart configuring this screen again.
Apply Click Apply to save the changes.
Table 20 System Settings: Billing: Billing Profile Setting (continued)
LABEL DESCRIPTION