© ZyXEL Communication Corp.
Page
23 of 31
Proprietary & Confidential Information
14.
[ITS #160300795][DSL][VMG1312-B10A][ADTRAN] New BRCM modem code
'A2pv6F039v'
15.
[ITS #150800479][VPN] UDP VPN fail after reboot
16.
[3G backup] upgrade 3G backup version to 1.16
17.
[WWAN] TR069 support upgrade 3G WWNAN package
18.
[VoIP] T.38 FAX Fallback and Can Accept Revert to Audio Request
19.
[VoIP] Don't Send VMWI Signal when MWI not Enabled
20.
[WWAN] Extend APN length to 100
[Bug Fix]
1.
[TE] Fix USB and VoIP test fail for TE
2.
[ITS #160200821][NAT] NAT Address Mapping Fails.
3.
[ITS #160500904][IntfGroup] Leaking interface grouping problem.
4.
[PQA #22595][GUI] IPv6 Next hop will change when user config VLAN ID.
5.
[PQA #23567][TR-069] TR-069 deamon will die after changing IP Protocol between
"Tr069 on IPv4 Only" and "Tr069 on IPv6 Only".
6.
[PQA #23584][TR-069] After DUT reboot, DUT will reply inform with 1 BOOT, 4
VALUE CHANGE and 2 PERIODIC event code.
7.
[PQA #23586][TR-069] After DUT reboot via tr69, DUT will reply inform with [M
Reboot], [1 BOOT], [4 VALUE CHANGE] and [2 PERIODIC] event code.
8.
[PQA #23766][TR-069] TR069 deamon will disappear and Connection Request URL
became blank while connect ACS with IPv6 Any_WAN then reboot.
9.
[PQA #24197][System] GUI default setting isn't matched the default setting table.
10.
[PQA #25456][WAN] Setting WAN interface to ADSL IPoA mode, WAN information in
Connection Status page is incorrect.
11.
[PQA #25491][Remote MGMT] enable trust domain function, we can not add trsut
domain host to DUT.
12.
[PQA #25492][Remote MGMT] first create trust domain host, we can not enable trust
domain function.
13.
[PQA #25574][Firewall] By default, change firewall mode to high then click to cancel but
GUI no response.
14.
[PQA #25580][Firewall] By default, protocol service no ICMPv6 option but after adding
an entry rule, the service have ICMPv6 option.
15.
[PQA #25620][Mac Filter] Mac address filter "cancel" button can't work.
16.
[PQA #23583][TR-069] After we change WAN IP (VDSL-PPPoE), DUT will reply
inform with 4 VALUE CHANGE and 2 PERIODIC event code.
