1.
4) DHCP Server state is ticked as Enabled by default as mentioned in below snapshot. Customer can disable it if they don't wish to use Router as a DHCP
Server.
5) Also please make sure
option deactivate (Blue to Grey) in case customer doesn't want to use IPv6 option by default.
IPv6 Active
Click on
to save changes.
Apply
Please proceed to the next page and beyond for guidance on Wi-Fi, firmware upgrades, remote management and SNMP.
Wi-Fi
The Zyxel VMG3925 router comes with two pre-configured Wi-Fi networks. The names (or SSIDs) of the two networks and their passwords can be found
on the manufacturer's label on the rear panel of the router.
Please note that the 2.4G option can offer better Wi-Fi coverage at greater distances, although it may see lower speeds in comparison to the 5G option.
If you wish to change the
or passwords of the Wi-Fi networks, the basic settings are available through the following steps:
names
Click on the Wi-Fi menu button on the main dashboard: