ZyXEL Communications VES-1616F-44, Руководство пользователя

Страница: 168 / 296

VES-1616F/1624F-44 User’s Guide
Chapter 23 Multicast VLAN Registration 167
Note: You can create up to three multicast VLANs and up to 266 multicast rules on
the switch.
Your switch automatically creates a static VLAN (with the same VID) when you
create a multicast VLAN in this screen.
Figure 82 MVR
The following table describes the related labels in this screen.
Table 66 MVR
LABEL DESCRIPTION
Active Select this check box to enable MVR to allow one single multicast VLAN to be
shared among different subscriber VLANs on the network.
Name Enter a descriptive name (up to 32 printable ASCII characters) for identification
purposes.
Multicast VLAN Enter the VLAN ID (1 to 4094) of the multicast VLAN.
802.1p Priority Select a priority level (0-7) with which the switch replaces the priority in outgoing
IGMP control packets (belonging to this multicast VLAN).
Mode Specify the MVR mode on the switch. Choices are Dynamic and Compatible .
Select Dynamic to send IGMP reports to all MVR source ports in the multicast
VLAN.
Select
Compatible to set the switch not to send IGMP reports.
Port This field displays the port number on the switch.
Name This field displays the port name (which you can configure in the Port Setup
screen).