ZyXEL Communications VDSL SWITCH VES-1616F-3X, Руководство пользователя

Страница: 153 / 310

Chapter 21 Multicast
VES-1616F-3x Series User’s Guide
153
Configure MVR IP multicast group address(es) in the Group Configuration screen. Click
Group Configuration in the MVR screen.
"
A port can belong to more than one multicast VLAN. However, IP multicast
group addresses in different multicast VLANs cannot overlap.
Figure 62 MVR > Group Configuration
The following table describes the labels in this screen.
Table 52 MVR > Group Configuration
LABEL DESCRIPTION
Multicast
VLAN ID
Select a multicast VLAN ID (that you configured in the MVR screen) from the drop-
down list box.
Name Enter a descriptive name for identification purposes.
Start Address Enter the starting IP multicast address of the multicast group in dotted decimal
notation.
Refer to
Section 21.1.1 on page 145 for more information on IP multicast addresses.
End Address Enter the ending IP multicast address of the multicast group in dotted decimal
notation.
Enter the same IP address as the
Start Address field if you want to configure only one
IP address for a multicast group.
Refer to
Section 21.1.1 on page 145 for more information on IP multicast addresses.
Add Click Add to save the settings.
Cancel Click Cancel to discard all changes.
MVLAN This field displays the multicast VLAN ID.
Name This field displays the descriptive name for this setting.
Start Address This field displays the starting IP address of the multicast group.
End Address This field displays the ending IP address of the multicast group.
Delete Select Delete All and click Delete to remove all entries from the table.
Select Delete Group and click Delete to remove the selected entry(ies) from the table.
Cancel Select Cancel to clear the checkbox(es) in the table.