ZyXEL Communications U-90E, Руководство пользователя

Страница: 97 / 152

U-90E Data/Fax Modem
Special Functions
10-3
Table 10-1 Security Function Commands
Command Function
*G0 Disable security function.
*G1 Enable type 1 and level 1 security, with password check.
*G2 Enable type 1 and level 2 security, with password check and
callback.
*G3 Enable type 2 and level 1 security, with password check.
*G4 Enable type 2 and level 2 security, with password check and
callback.
*G5 Enable type 2 and level 2 security, with password check and
callback, remote site enters the callback number.
Note: Before the security type or level can be changed, the modem requires the
supervisor password.
For type 2 security, the remote site will be prompted to enter the user password. A
maximum of 3 entries in 40 seconds is allowed. If a correct password is not entered within
this time limit the line will be disconnected. If the remote site is to enter the callback
number it will be prompted to do so.
10.2 Remote Configuration
Remote configuration on the U-90E is provided as a profile by profile batch mode.
Batch mode remote configuration is a convenient feature allowing you to pre-configure a
remote modem in one of the local modem’s user profiles and send it to the remote modem
in one action. It is particularly useful when there are many remote modems and a set of
standard configurations is available so you can store them into user profiles. You just
need to configure the remote modem into one of the standard configurations by activating
the remote configuration once.
When on-line, the remote modem’s current configuration or one of its profiles can be read
into one of the local modem’s user profiles. You can then disconnect the modem and
modify the profile locally.