ZyXEL Communications U-336S, Руководство пользователя

Страница: 55 / 159

Leased Line Operation 43
5
Leased Line Operation
A leased line is a permanent telephone line connection between two
fixed points. It can be dedicated copper wires or a leased telephone
circuit from the telephone company. Four-wire leased lines use one
pair of wires to transmit data and a second pair to receive. Two-
wire leased lines transmit and receive on the same pair of wires.
Your modem supports 2 and 4-wire leased lines.
Connecting to a Leased Line
The U-336S default line is a dial-up type (DL) which includes a
separate leased-line jack. The leased line must be connected to the
jack labeled LEASED LINE (located at the rear of the modem).
You can set your modem for leased-line operation by typing
commands from the terminal or by selecting it from the front panel.
The leased-line phone jack pin assignments are shown in Chapter
12 Connector Pinouts.
Line Type Setting
AT-Command Description
AT&L1 The modem is connected to a 2-wire leased line;
the line plug should be plugged into the jack
assigned LEASED LINE on the rear panel.
AT&L2 The modem is connected to a 4-wire leased line.
Plug the line into the LEASED LINE jack.
Power Level Setting
Your modem’s leased-line mode transmission power level can be
adjusted from 0 dBm to -27 dBm in 1 dBm increments.