ZyXEL Communications U-336E, Руководство пользователя

Страница: 79 / 137

Fax Operation 67
•
RTS is used to inform your modem that the computer cannot
accept data at this moment. The modem will not pass received
data to the DTE if RTS is turned off.
When finished receiving the fax message, your modem will turn off
CD then send a status report result code to the DTE.
Fax Reception from a BBS
The U-336E can automatically detect data and fax calls and allow
BBS software to receive faxes on the same phone line. To allow
your BBS to receive incoming faxes, make the following set-up
changes in your BBS:
1. Add the string #B1+FCLASS=6 to the init string. Be sure the
+FCLASS=6 command is the last command.
2. Change one of the messages in the list to CONNECT FAX.
3. Set the external mail string to ZyXEL and give it an error level.
4. In your BBS batch file, if the error level matches the external
mail, execute
rcvfax 2 /p:comport [/w:workpath]
This setting will enable the BBS to receive a fax and store it
automatically.
The following is a sample setting for the FrontDoor system.
•
Add these commands to the init string:
X7#B1+FCLASS=6
•
Change the connection message to:
300 CONNECT 4800 CONNECT 4800
1200 CONNECT 1200 9600 CONNECT 7200
1275 CONNECT FAX 19200 CONNECT 9600