ZyXEL Communications SMG-700 Скачать руководство пользователя страница 6

Страница: 6 / 80

Safety Warnings

STB-1001S2 User’s Guide

Safety Warnings

• Do NOT use this product near water, for example, in a wet basement or near a swimming

pool.

• Do NOT expose your device to dampness, dust or corrosive liquids.

• Do NOT store things on the device.

• Do NOT install, use, or service this device during a thunderstorm. There is a remote risk

of electric shock from lightning.

• Connect ONLY suitable accessories to the device.

• Do NOT open the device or unit. Opening or removing covers can expose you to

dangerous high voltage points or other risks. ONLY qualified service personnel should
service or disassemble this device. Please contact your vendor for further information.

• Make sure to connect the cables to the correct ports.

• Place connecting cables carefully so that no one will step on them or stumble over them.

• Always disconnect all cables from this device before servicing or disassembling.

• Use ONLY an appropriate power adaptor or cord for your device. Connect it to the right

supply voltage (for example, 110V AC in North America or 230V AC in Europe).

• Do NOT allow anything to rest on the power adaptor or cord and do NOT place the

product where anyone can walk on the power adaptor or cord.

• Do NOT use the device if the power adaptor or cord is damaged as it might cause

electrocution.

• If the power adaptor or cord is damaged, remove it from the device and the power source.

• Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a

new one.

• Do not use the device outside, and make sure all the connections are indoors. There is a

remote risk of electric shock from lightning.

• Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your

device.

• If you wall-mount your device, make sure that no electrical lines, gas or water pipes will

be damaged.

This product is recyclable. Dispose of it properly.

Содержание SMG-700

















































































Результаты поиска

Содержание SMG-700

Отзывы:

Похожие инструкции для SMG-700

Бренды по названию

Популярные бренды

ZyXEL Communications SMG-700, Руководство пользователя

Результаты поиска

Содержание SMG-700

Отзывы:

Похожие инструкции для SMG-700

Бренды по названию

Популярные бренды