8
4.2.2.5 Three Way Calling (Call Conference)
The Three Way Calling feature allows you to add the third party to an existing call. The Flexible
Calling service must be subscribed from the Telephone Company.
4.2.2.5.1 How to Add the Third Party to the Existing Call
•
If you wish to add the third party to an existing call, the steps are:
1. Press the flash hook button and immediately release it to put the existing call on hold
and receive a dial tone.
2. Dial the third party.
3. Inform the third party about the conference.
4. When you are ready to conference the call, press the flash hook button and immediately
release it to establish a Three Way Conference Call.
•
If you wish to cancel your attempt for some reason (the third party’s line is busy, or no one
answer, …), just hang up the phone and pick it back up after the phone ringing.
4.2.2.5.2 How to Remove a Party from the Three Way Calling
•
If you wish to drop the last one added to the Three way calling call, just press the flash key.
The last call that was added to the conference will be dropped.
•
If you wish to drop yourself from the conference call, but allow the other two callers to remain
connected. Just hang up your phone. If the other two remain on the line, your drop will not
impact their connection.
4.2.2.6 Call Transfer
Call Transfer allows you to transfer an active call to a third party. The Flexible Calling service
has to be subscribed from the Telephone Company. In fact, Call Transfer is a variance of Three
Way Calling.
If you wish to transfer an active call to a third party and inform him about the transferred call, the
steps are:
1. Press flash to immediately put the existing call on hold and receive a dial tone.
2. Dial the third party.
3. Inform the third party about the transfer call.
4. Press the flash hook button and immediately release it to establish a Three Way Conference
Call.
5. Hang up the phone to complete the transfer.
If you wish to do a blind transfer to the third party, the steps are:
1. Press flash to immediately put the existing call on hold and receive a dial tone.
2. Dial the third party.
3. Before the third party picks up the call, you can transfer the call by pressing the flash and
hanging up. The call will be automatically transferred.
4.2.2.7 Call Forwarding
The Call Forwarding feature is supported by ISDN switch directly. The Call Forwarding feature of
the POTS port can be activated and deactivated by using the phone set. The Call Forwarding is
a telephone feature and will not impact incoming data call. Please request your phone company