ZyXEL Communications Prestige 941, Руководство пользователя

Страница: 45 / 99

Prestige 941 Cable Router
Internet Access 3-5
Follow the instructions in the following table on how to configure the DHCP fields.
Table 3-1 LAN DHCP Setup Menu Fields
FIELD DESCRIPTION EXAMPLE
DHCP
This field enables/disables the DHCP server. If it is set to
Server , your Prestige will act as a DHCP server. If set to None ,
DHCP service will be disabled and you must have another
DHCP sever on your LAN, or else the workstation must be
manually configured.
When DHCP is set to Server , the following four items need to
be set.
None
Server (default)
Client IP Pool
Starting Address This field specifies the first of the contiguous addresses in the
IP address pool. 192.168.1.33
Size of Client IP Pool This field specifies the size, or count of the IP address pool. 6
Primary DNS
Server
Secondary DNS
Server
Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and
the subnet mask.
Follow the instructions in the following table to configure TCP/IP parameters for the LAN port.
Table 3-2 LAN TCP/IP Setup Menu Fields
FIELD DESCRIPTION EXAMPLE
TCP/IP Setup
IP Address Enter the IP address of your Prestige in dotted decimal notation.
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige. 255.255.255.0
RIP Direction Press [space bar] to select the RIP direction from
Both/In Only/
Out Only/None. Both
Version Press [space bar] to select the RIP version from
RIP-1/RIP-2B/
RIP-2M.
RIP-1
When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm…] to save
your configuration, or press [Esc] at any time to cancel.