ZyXEL Communications Prestige 652 Series, Руководство пользователя

Страница: 126 / 523

Prestige 652 Series User’s Guide
10-2 Time Zone
The following table describes the fields in this screen.
Table 10-1 Time/Date
LABEL DESCRIPTION
Time Server
Use Time Server
when Bootup
Select the time service protocol that your time server sends when you turn on the
Prestige. Not all time servers support all protocols, so you may have to check with
your ISP/network administrator or use trial and error to find a protocol that works.
The main difference between them is the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC 868) format displays a 4-byte integer giving the total number of seconds
since 1970/1/1 at 0:0:0.
The default,
NTP (RFC 1305), is similar to Time (RFC 868).
Select None to enter the time and date manually.
Time Server IP
Address
Enter the IP address of your time server. Check with your ISP/network administrator
if you are unsure of this information (the default is tick.stdtime.gov.tw).
Time Zone Choose the time zone of your location. This will set the time difference between your
time zone and Greenwich Mean Time (GMT).
Daylight Savings Select this option if you use daylight savings time. Daylight saving is a period from
late spring to early fall when many countries set their clocks ahead of normal local
time by one hour to give more daytime light in the evening.
Start Date Enter the month and day that your daylight-savings time starts on if you selected
Daylight Savings .
End Date Enter the month and day that your daylight-savings time ends on if you selected
Daylight Savings .
Calibrate system
clock with Time
Server now Click this button to have your Prestige use the time server (that you configured
above) to set its internal system clock.
Date
Current Date This field displays the date of your Prestige.
Each time you reload this page, the Prestige synchronizes the time with the time
server.
New Date This field displays the last updated date from the time server.
When you select None in the Use Time Server when Bootup field, enter the new
date in this field and then click Apply .
Time