ZyXEL Communications Prestige 650ME, Руководство пользователя, Страница: 67 / 199

Prestige 650ME ADSL Bridge
Remote Node Configuration 4-3
The second is that the Prestige will try to bring up the connection when turned on and whenever the
connection is down.
A nailed-up connection can be very expensive for obvious reasons. Do not specify a nailed-up connection
unless your telephone company offers flat-rate service or you need a constant connection and the cost is of
no concern.
Figure 4-2 Menu 11.1 – Remote Node Profile
In Menu 11.1 – Remote Node Profile , fill in the fields as described in the following table.
Table 4-1 Remote Node Profile Menu Fields
FIELD DESCRIPTION EXAMPLE
Rem Node Name Type a unique, descriptive name of up to eight characters for
this node. ChangeMe
Active Press [SPACE BAR] to select Yes and then [ENTER] to
activate this node. Inactive nodes are displayed with a minus
sign “–“ in SMT menu 11.
No
Encapsulation Press [SPACE BAR] and then [ENTER] to select PPPoE
(Point-to-Point Protocol over Ethernet) or RFC-1483
(Multiprotocol Encapsulation over ATM Adaptation Layer 5).
If RFC-1483 is selected, then the Rem Login , Rem
Password , My Login , My Password , Edit PPP options and
Authen fields are not applicable ( N/A ).
PPPoE
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe Route= IP
Active= Yes Bridge= No
Encapsulation= PPPoE Edit IP/Bridge= No
Multiplexing= LLC-based Edit ATM Options= No
Service Name=
Incoming: Telco Option:
Rem Login= Allocated Budget(min)= 0
Rem Password= Period(hr)= 0
Outgoing: Schedule Sets=
My Login= Nailed-Up Connection= No
My Password= Session Options:
Authen= CHAP/PAP Edit Filter Sets= No
Idle Timeout(sec)= 100
Edit Traffic Redirect= No
Press ENTER to Confirm or ESC to Cancel: