ZyXEL Communications Prestige 650M-17 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 89

background image

Prestige 650M-17 ADSL Modem

xii

Preface

Preface

Congratulations on your purchase of the Prestige 650M-17 ADSL Internet Access modem.

The Prestige 650M-17 is an ADSL modem used for Internet/LAN access via an ISDN line. The Prestige
can run maximum upstream transmission rates of up to 832Kbps and maximum downstream transmission
rates of 8Mbps. The actual rate depends on the copper category of your ISDN wire, distance from the
central office and the type of ADSL service subscribed to. See the

What is DSL

section for more

background information on DSL and ADSL.

The Prestige’s 10/100M auto-negotiating LAN interface enables fast data transfer of either 10Mbps or
100Mbps in either half-duplex or full-duplex mode depending on your Ethernet network.

Your Prestige is easy to install and configure. All functions of the Prestige are software configurable via the
SMT (System Management Terminal) using Telnet. Advanced users may configure the Prestige using CLI
(Command Line Interface) commands.

Register your Prestige online at

www.zyxel.com

for free future product updates

and information.

About This User's Guide

This User's Guide covers all aspects of Prestige operations and shows you how to get the best out of the
multiple advanced features of your ADSL Internet access modem using SMT menus. It is designed to guide
you through the correct configuration of your Prestige for various applications.

Related Documentation

Supporting Disk
More detailed information and examples can be found in our included disk (as well as on the
zyxel.com web site). This disk contains information on configuring your Prestige for Internet
Access, general and advanced FAQs, Application Notes, Troubleshooting, a reference for CI
Commands and bundled software.

Read Me First

Our Read Me First is designed to help you get up and running right away. It contains a detailed
easy-to-follow connection diagram, default settings, handy checklists and information on setting
up your network and configuring for Internet access.

ZyXEL Glossary and Web Site
Please refer to www.zyxel.com for an online glossary of networking terms and additional support
documentation.

Syntax Conventions

«
...
10
11
12
13
14
...
»

Содержание Prestige 650M-17


























































































Отзывы:

Нет отзывов

Похожие инструкции для Prestige 650M-17

Бренд: Campbell Страницы: 90

Бренд: Paradyne Страницы: 122

Бренд: Paradyne Страницы: 24

COMSPHERE 3920PLUS Series

Бренд: Paradyne Страницы: 285

COMSPHERE 3821PLUS

Бренд: Paradyne Страницы: 28

Бренд: THOMSON Страницы: 28

Бренд: KaiDeng Страницы: 4

Бренд: Panasonic Страницы: 6

Бренд: Panasonic Страницы: 58

Digital Business System

Бренд: Panasonic Страницы: 87

Бренд: Panasonic Страницы: 135

Бренд: AVM Страницы: 28

Бренд: ProSoft Technology Страницы: 136

Бренд: Proscend Страницы: 102

Бренд: Eurotech Страницы: 120

Бренд: FAAC Страницы: 20

Бренд: NETGEAR Страницы: 2

Бренд: SmartRG Страницы: 117

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды