ZyXEL Communications Prestige 28641, Руководство пользователя

Страница: 99 / 159

Novell IPX Configuration 85
6. Hop Count - This field indicates the number of intermediate
networks that must be passed through to reach the Remote Node.
The default is one (1).
7. Tick Count - This field indicates the time-ticks required to reach
the Remote Node. The default is two (2).
8. W/D Spoofing (min) - This field is used for the Prestige on the
server side LAN. The Prestige can spoof a response to a server’s
WatchDog request after the connection is dropped. In this field,
enter in the time (number of minutes) that you want the Prestige to
spoof the WatchDog response.
9. SAP/RIP Timeout (min) - This field indicates the amount of time
that you want the Prestige to maintain the SAP and RIP entries
learned from this Remote Node in its internal tables after the
connection has been dropped. If this information is retained, then
the Prestige will not have to get the SAP information when the line is
brought back up. Enter the time (number of minutes) in this field.
Once you have completed filling in the Network Layer Options Menu,
press
ENTER to return to Menu 11.1. Press ENTER at the message:
Press ENTER to Confirm ... to save your selections, or press ESC at
any time to cancel your selections.
Static Route Setup
If your LAN-to-LAN application has NetWare servers on both sides
of the link, then all NetWare client stations will have access to a server
on their LAN as shown below: