ZyXEL Communications Prestige 2802HW(L)-IX, Поддержка заметок, Страница: 18 / 187

Prestige 2802HW(L)-Ix Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
18
•
Example
The following example shows how to dial to an ISP via the Prestige and then establish a tunnel to a private
network. There will be three items that you need to set up for PPTP application, these are PPTP server (WinNT),
PPTP client (Win9x) and the Prestige.
o
PPTP server setup (WinNT)
ƒ
Add the VPN service from Control Panel>Network
ƒ
Add an user account for PPTP logged on user
ƒ
Enable RAS port
ƒ
Select the network protocols from RAS such as IPX, TCP/IP NetBEUI
ƒ
Set the Internet gateway to Prestige
o
PPTP client setup (Win9x)
ƒ
Add one VPN connection from Dial-Up Networking by entering the correct
username & password and the IP address of the Prestige's Internet IP address for
logging to NT RAS server.
ƒ
Set the Internet gateway to the router that is connecting to ISP
o
Prestige router setup
•
Before making a VPN connection from Win9x to WinNT server, you need to connect Prestige
router to your ISP first.
•
Go to WEB GUI “Network>NAT>Port Forwarding”. Enter the IP address of the PPTP server
(WinNT server) and specify the Service Name for PPTP as shown below.