ZyXEL Communications PLA-450 - V3.60, Руководство пользователя, Страница: 77 / 190

Chapter 6 Wireless LAN
PLA450 User’s Guide
77
6.10 WPS Screen
Use this screen to enable WiFi Protected Setup (WPS) on your PLA450 and to set up a WPS
connection using a PIN (Personal Identification Number) generated by the PLA450.
See
Section 6.5.1 on page 64 for instructions on using WPS with a PIN.
Click Network > Wireless > WPS . The following screen displays.
Figure 41 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Dest Port This displays the port the selected service uses. Type a port number in the
field provided if you want to use a different port to the default port.
Priority Select a priority from the drop-down list box.
Highest - Typically used for voice.
High - Typically used for video.
Mid - Typically used for applications that do not fit into another priority. For
example, Internet surfing.
Low - Typically used for non-critical “background” applications, such as large
file transfers and print jobs that should not affect other applications.
Apply Click Apply to save your changes back to the PLA450.
Cancel Click Cancel to return to the previous screen.
Table 18 Network > Wireless LAN > QoS: Application Priority Configuration (continued)
LABEL DESCRIPTION
Table 19 Network > Wireless LAN > WPS
LABEL DESCRIPTION
WPS Setup
Enable WPS Use this to turn WiFi Protected Setup on or off.
PIN Number This is the PIN (Personal Identification Number) the PLA450 uses
to authenticate other WPS-enabled wireless devices. The PIN is
not necessary when using WPS’s push-button method.
Enter this PIN in the configuration utility of the device you want to
connect to using WPS. You may need to write this down.