ZyXEL Communications PLA-402 v3, Руководство пользователя

Страница: 82 / 94

Chapter 9 LEDs and Troubleshooting
PLA-402 v3 User’s Guide
82
3
Your coaxial adapters may be placed close to electrical devices such as electrical
insect-killers which produce radio waves. These may interfere with the powerline
signals. Move the adapters further away from such electrical devices.
4
Your wiring may be old and/or low quality or with a long wiring path.
9.5 SETUP Button Problems
This section applies only to PLA-402 v3s with the SETUP button.
The HomePlug light is already on, but I haven’t pressed the SETUP button yet.
Your device has already connected to another coaxial device. Press the SETUP
button for more than 10 seconds to release the connection.
The POWER light does not blink when I press the SETUP button.
• Check the device is on.
• Press the
SETUP button again, making certain you have pressed the button for
more than one second and less than three seconds.
• The POWER light on some coaxial devices do not blink as part of the SETUP
process. Check your coaxial device is a PLA-402 v3.
• For PLA-402 v3, you cannot use the SETUP button when it is in Low Power
mode. Connect the PLA-402 v3 to a computer/router then try again.
The POWER light blinks two times quickly then pauses, before repeating.
The SETUP process has failed. Press the SETUP button on both devices for more
than 10 seconds, then try to reconnect.
The POWER lights on both devices blink when I press the SETUP buttons, but the
HomePlug light does not turn on.
• Ensure you have pressed the SETUP button on both devices.