ZyXEL Communications PLA-402 v3, Руководство пользователя

Страница: 29 / 94

PLA-402 v3 User’s Guide
29
C
H A P T E R
4
The SETUP Button
Use the SETUP button to automatically set up a secure coaxial connection
between your PLA-402 v3s.
4.1 SETUP Button Overview
The SETUP button allows you to set up a secure coaxial connection with other
HomePlug AV compliant coaxial devices which also support the SETUP feature. No
other setting changes are required to connect.
You can use the SETUP button to:
• set up a new powerline coaxial network
• separate an existing powerline coaxial network into multiple networks
4.2 Set Up a HomePlug AV Network with SETUP
You can connect a number of devices on a powerline coaxial network, but you can
use the
SETUP button on only two devices at a time.
1
Place a coaxial device close to another coaxial device so you have time to set up
each one. After you set up the first coaxial device, you have 120 seconds to set up
the second coaxial device.
2
You can disconnect them from your computer or modem (or other networking
equipment) if you need to move them close to each other, but the coaxial devices
need to be plugged into power outlets.
Note: Because your PLA-402 v3 goes into Low Power mode, it must be connected to
a networking equipment for the SETUP button to work. Refer to Section 2.3 on
page 24 for more details.
3
Press the SETUP button at the rear of your coaxial device for more than 10
seconds until the power ( ) light flashes. This resets the network name to a
random value and removes your device from any network it may belong to.