ZyXEL Communications PEC-50, Руководство пользователя

Страница: 14 / 19

4
2. The port’s cable is firmly seated in its connectors on the
converter and on the connected device.
3. The cable is good and is of the correct type.
4. The connected device, i.e., the network adapter, is
functioning.
2.4 The Rear Panel
The rear panel of the converter is shown below.
2.4.1 Network Connections
The 1 Mbps phoneline networking port has two RJ-11 (smaller)
connectors. To connect the converter to the phoneline network,
connect the
IN port to the wall jack and connect a telephone set to
the OUT port.
To connect the converter to the Ethernet network, insert one end
of UTP cable with RJ-45 (bigger) connectors to the
LAN port and
the other end to the Ethernet adapter on a computer.
OUT IN LAN PWR