P-871H Series User’s Guide
Chapter 6 VLAN
47
• sent to a VLAN group as normal depends on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
You can also tag all outgoing frames (that were previously untagged) from a port with the
specified VID.
To configure a static VLAN, click
Static VLAN
in the
VLAN Status
screen to display the
screen as shown next.
Figure 19
VLAN: Static VLAN
The following table describes the related labels in this screen.
Table 16
VLAN: Static VLAN
LABEL
DESCRIPTION
Name
Enter a descriptive name for the VLAN group for identification purposes.
VLAN Group ID
Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
Port
This field displays the Ethernet port number or the VDSL port (
VDSL
).
Control
Select
Normal
for the port to dynamically join this VLAN group using GVRP. This is
the default selection.
Select
Fixed
for the port to be a permanent member of this VLAN group.
Select
Forbidden
if you want to prohibit the port from joining this VLAN group.
Tagging
Select
TX Tagging
if you want the port to tag all outgoing frames transmitted with
this VLAN Group ID.
Add
Click
Add
to add the settings as a new entry in the summary table below.
Cancel
Click
Cancel
to reset the fields.
Clear
Click
Clear
to start configuring the screen again.
Содержание P-871H Series
