Prestige 794M User’s Guide
97
Chapter 8 QoS (Quality of Service)
Figure 68
QoS: Prioritization
The following table describes the labels in this screen.
Table 50
QoS: Prioritization
LABEL
DESCRIPTION
Application
Enter a descriptive name for identification purposes.
Time Schedule
Specify when this rule is active. Select
Always On
to activate the rule all the time.
Otherwise, select a schedule (that you configure in the
Time Schedule
screen).
Priority
Select a priority level. Choices are
High
and
Low
.
Protocol
Select a protocol type from the drop-down list box. Choices are
any
,
tcp
,
udp
,
icmp
and
gre
.
Source Port
Enter the source port number from which traffic travels.
Destination Port
Enter the destination port number to which traffic travels.
Source IP Address
Range
You can set the Prestige to prioritize traffic from specified source IP address(es).
Specify one or a range of source IP address(es). Leave the fields as 0.0.0.0 to
prioritize packets from any source IP address.
Destination IP
address Range
You can set the Prestige to prioritize traffic to specified destination IP address(es).
Specify one or a range of destination IP address(es). Leave the fields as 0.0.0.0 to
prioritize packets from any destination IP address.