P-791R v2 Support Notes
Product FAQ
1. What is SHDSL, SHDSL.bis?
SHDSL stands for Symmetric High-data-rate Digital Subscriber Line. SHDSL
bases on TC-PAM (Trellis Coded Pulse Amplitude Modulation) which offers
symmetrical transmission speed up to 2.30 Mbps (2-wire mode).
SHDSL.bis boots SHDSL performance to approximately 5.70 Mbps (2-wire
mode) or 11.4 Mbps (4-wire mode).
Note: P-791R v2 only support 2-wire mode.
2. How can I manage P-791R v2?
Multilingual Embedded Web GUI for Local and Remote management
SMT via console.
Telnet support (Administrator Password Protected ) for remote
configuration change and status monitoring
FTP/ TFTP sever, firmware upgrade and configuration backup and
restore are supported(Administrator Password Protected)
3. What is the default password for Web Configurator?
There are two different accounts for P-791R v2 Web Configurator:
Common
User Account
and
Administrator Account.
By factory default the password for the two accounts are:
•
Common User Account:
user
•
Administrator
Account:
1234
.
You can change the password after you logging in the Web Configurator.
Note: By default, the password is “user”.
4. What’s the difference between ‘Common User Account’ and
‘Administrator Account’?
For Common User Account, it can only access the status monitor of P-791R v2
and check the current system status.
For Administrator Account, besides accessing the status monitor of P-791R v2,
it can also access Winzard setup / Advanced setup of P-791R v2.
12
All contents copyright © 2007 ZyXEL Communications Corporation.
