P-664HN-T1 Quick Start Guide
1
Select
Active
and click
Next
to continue. It is strongly recomm ended that
Enable OTIST
is NOT selected.
See section
7
for m ore information.
2
Configure your wireless settings in the screen. Click
Next
.
3)
If you select either
WEP
or
WPA-PSK
security (recommended), then follow the directions to enter
the appropriate key. Click
Next
to continue and
Appl y
to save your wireless LAN settings.
4
Check your configuration and write down your wireless LAN settings for later use. Click
Finish
to complete and
save the wizard setup.
5
Your Internet is ready for you to use. Open your browser and navigate to your favorite website.
4 Internet Connection Setup Using Advanced Settings
Use this section to set up your Internet connection m anually if you do not see the
ISP Parameters for Internet
Access
screen when you run the wizard (see section
4
, step
4
).
1
Login again. (Follow steps
1
to
5
in section
3
.)
2
Select
Go to Advanced setup
. Then, click
Appl y
.
3
The
Status
screen appears. Click
Network
>
WAN
in the navigation panel on the left of the screen.
4
Enter the inform ation exactly as provided by your ISP. Click
Appl y
.
5
If you still cannot access the Internet, see
Troubleshooting
and/or contact your Internet Service Provider
(ISP) for assistance.
4
