ZyXEL Communications P-660HWP-D1, Руководство пользователя

Страница: 62 / 374

Chapter 3 Wizard Setup for Internet/Wireless Access
P-660HWP-D1 User’s Guide
62
Figure 27 Connection Test Successful
The following table describes the labels in the screen.
Table 13 Connection Test Successful
• If the wizard does not detect a connection type and the following screen appears (see
Figure 28 on page 63 ), check your hardware connections and click Restart the
INTERNET/WIRELESS SETUP Wizard to have the P-660HWP-D1 detect your
connection again.
LABEL DESCRIPTION
Continue to
Wireless Setup
Wizard
Select Yes to continue to Step 2 of the wizard where you can configure your wireless
settings. Select No to finish the wizard.
Reconfigure Select Reconfigure to try to log on with a different user name and password. The P-
660HWP-D1 tries to auto-detect your connection using the new user name and
password.
User Name Enter the user name exactly as your ISP assigned. If assigned a name in the form
user@domain where domain identifies a service name, then enter both components
exactly as given.
Password Enter the password associated with the user name above.
Apply Changes Enter the VPI assigned to you. This field may already be configured.
Next Click Next to continue to the next wizard screen.
Exit Click Exit to close the wizard screen without saving your changes.