ZyXEL Confidential
340AGL4C0.doc
6/41
Step1:GUI-
＞
WAN set two remote node,and use same encapsulation,different VPI/VCI,
and set static IP. Lan PC ping remote node 2 gateway successfully.
Setp2: Delete the remote node 2, and set the same setting in other rule, such as remote
node 5. Lan PC ping remote node 5 gateway, the device will crash.
14. [BUG FIX] SPRID: 060706297
Symptom: CI Command "ip nat server clear [set#]" can not work
Condition: step1:In SMT or GUI add several server
step2:In SMT,use CI Command "ip nat server load [set#]","ip nat server clear [set#]"
and "ip nat server save",it can not clear the server [set#].
15. [BUG FIX] SPRID: 060706298
Symptom:When you add Firewall Rules, another rule will be added automatically.
Condition:1.Add rules one by one,2.When you add the fourth rule, the rule you have
edited will be added, and the fifth rule with default setting will be added
automatically.3.You can add rules continuously, it always shows the same results. For
example, you add the sixth rule , the seventh rule with default setting will be added
automatically
16. [BUG FIX] SPRID: 060706299
Symptom: Can't add 11th Port Forwarding set in eWC NAT.
Condition: If want to add 11th Port Forwarding set, system displays "Max number of
Port Forwarding rules can be added is 11" and won't accept. Iin CI, system allow users to
add 11th set and can see it in eWC.
17. [BUG FIX] SPRID: 060706300
Symptom: LCP echo request ,LCP echo reply and OAM packets are lost under some
stress test.
Condition: PC uploads data via Iperf traffic load simulator with UDP packets ,then
PPPoA connection disconnects after 30-60 seconds and recovers after 30-40 seconds.
18. [FEATURE ENHANCE]
User can set NAT session number per host In GUI
19. [FEATURE ENHANCE]
RomPager upgrade to version 4.5
Modifications in V 3.40(AGL.3)C0 | 05/29/2006
1
．
Change to FCS version
Modifications in V 3.40(AGL.3)b1 | 05/29/2006
1 . [FEATURE ENHANCE]
Add reset button WLAN Active--Inactive behavior, the reset button new behavior is
below:
For WLAN model:
- 1 sec: enable/disable WLAN function
- 3 sec: enable OTIST
- 10 sec: reset to factory default
2. [FEATURE ENHANCE]
Engineer note:Add CLI command to control wlan restart or not after download NVS
files.
3 . [FEATURE ENHANCE]
