ZyXEL Communications P-600 Series, Руководство по установке

Страница: 1 / 6

Procedure to install a bitstream Zyxel modem.
1. Open the box and remove it’s contents. This includes the following items;
a. 1 * Zyxel P-600 series modem
b. 1 * Power supply
c. 1 * telephone cable (grey)
d. 1 * Network cable (yellow)
e. 3 * DSL line filters
f. 1 * CD
g. 1 * quick start guide
h. 1 * Magnet user manual
2. Plug one end of the grey telephone cable into the Modem DSL port and the other
end into the DSL/HPN port of the DSL line filter.
3. Plug the DSL line filter into the primary telephone socket in your home.
4. Plug the network cable into any of the 4 Ethernet ports on the modem and the
other end of the cable into the network card of your PC.
5. Plug the power cable into the power port on the back of the modem. Plug the
power supply into a power socket, ensuring that if the power socket has a switch,
that it is in the on position.
6. Press the ON/OFF switch to the ON position.
7. Allow the Modem approx 60 seconds to boot. You will know the modem has
booted fully when you see the following lights lit on the modem;
a. Power
b. WLAN
c. DSL
d. Ethernet Port (whichever Light corresponds to the position of the Network
cable)
8. Open Internet explorer on your PC
9. Type http://192.168.1.1 in the address bar of your Internet browser, the following
screen will appear;