ZyXEL Communications P-2302HWL DECT USB, Быстрый старт

Страница: 8 / 16

P-2302HWUDL-P1 Quick Start Guide
8
B Select No in the Do you want to enable OTIST ? radio button.
Note: These settings allow you to access the wireless network without setting up any security on your
wireless client. This means that any wireless device within range of your P-2302HWUDL-P1 can
access your wireless network.
If you know the security settings you want to set up you can also enter them in these screens. If
you want to set up OTIST, see the following section. Refer to your User’s Guide for more
information on setting up your wireless network.
OTIST
ZyXEL's One-Touch Intelligent Security Technology (OTIST) feature allows you to automatically configure the
SSID and WPA-PSK on all OTIST-equipped wireless clients within range of the P-2302HWUDL-P1.
Note: If you enable OTIST but select None in the Security field using the wireless wizard, the P-
2302HWUDL-P1 will create a WPA-PSK automatically.
If you enable OTIST and select Basic(WEP) in the Security field using the wireless wizard, the
P-2302HWUDL-P1 will replace the WEP key with a WPA-PSK.
Enable OTIST only if your wireless clients support WPA and OTIST.
You must enable OTIST on the P-2302HWUDL-P1 and all wireless clients within three minutes in any order.
To enable OTIST on wireless clients, click Start in the Adapter screen. The Setup Key is 01234567 by default.
If you have previously saved a setup key on the P-2302HWUDL-P1, use it instead of the default.
A
B