ZyXEL Communications P-128IMH, Руководство пользователя, Страница: 115 / 191

Prestige 128IMH ISDN Modem/ Router/Hub
Dial-I n Server Configuration 8-7
field specifies the first one in the pool.
IP Count (1,2) In this field, enter the number ( 1 or 2 ,) of addresses in
the IP Pool. For example, if the starting address is
192.168.135.5 and the count is 2, then the pool will have
192.68.135.5 and 192.68.135.6
1, 2
IPX Net. Num. Supplied By:
IPX Pool This field tells your Prestige to provide the remote host
with an IPX network number from the pool. Otherwise,
your Prestige will generate a random IPX network
number. Yes/No
(Default = No )
IPX Start Net Num This field is applicable only if you selected Yes in the
Dial-In IPX Net. Num. Supplied By: IPX Pool field. The
IPX pool contains contiguous IPX network numbers and
this field specifies the first one in the pool.
IPX Count (2,16) Enter the number (2 - 16) of network numbers in the IPX
Pool. For example, if the starting number is 12345678,
and the count is 2, then the IPX pool will have 12345678
and 12345679.
2 to 16
Session Options:
Edit Filter Sets
Press Yes, then [Enter] to edit the filter sets. Keep in
mind that the filter set(s) will only apply to remote dial-in
users but not the remote nodes.
Note that spaces and [-] symbol, are accepted in this
field. For more information on customizing your filter
sets,
see Chapter 9 - Filter Configuration . The default is
blank, i.e., no filters.
Default = blank
Once you have completed filling in Menu 13 - Default Dial-in Setup, press [Enter] at the message [Press
ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel.