omni.net LCD series Quick Start Guide
6-1
6.
Install Driver and PPP Setup for
MacOS
This section provides step by step procedures to install the USB driver and set up PPP on MacOS.
Install Driver for MacOS
ZyXEL_USB_Installer, a MindVision VISE Installer, is used to install ZyXEL USB omni.net LCD
Plus SUB driver on your Macintosh computer. Follow the instructions below.
Step 1.
Be sure your omni.net LCD Plus is on.
Step 2.
Insert the
BONUS CD
attached with your TA device into your
CD-ROM
drive. You will
see the icon as shown below.
Step 3.
Plug the USB connector that is attached to your USB-TA into any one of your computer
devices with USB port, (such as your monitor, keyboard, etc).
Note: If you have used the USB connector to connect your USB-TA with another USB
device before you have inserted the BONUS CD into your CD-ROM drive, then your
computer will show an error message.
Step 4.
Double click on the
ZyXEL_USB_Installer
icon and then click
Continue
.
