ZyXEL Communications omni.net D, Техническое описание

Страница: 51 / 186

Technical Reference for ZyXEL omni.net series
4-3
Supported AT Command Types
Type of AT Command Supported Example
Basic AT (Hayes compatible) ATA
Basic AT$ (on line help)
AT$
(Browse the list of AT commands)
Extended AT& AT&F
Extended AT* command AT*D0
S-Register command ATS0=1
S-Register bit-mapped command ATS13.1=1
(Set S-Register 13 bit-1 equal to 1)
S-Register inquiry command
ATS0?
or
ATS13.1?
Table 20. Supported AT Command Types
Quick Tips when Issuing AT Commands
!
To execute an AT command, press the <ENTER> or <RETURN> key.
!
Multiple AT commands can be combined into one line by using the [
AT&
] function. For
example, [
AT&O2
] and [
ATB02
] can be combined into one line [
AT&O2B02
].
!
The TA executes commands from left to right. The AT command that appears to the right
might over-write the command to the left. For example, [
ATB13B14
] will result in
[
ATB14
] since both [
B13
] and [
B14
] can not co-exist.
!
If you see duplicated characters for each one you type, your omni.net and software both
have their echo feature turned on (the omni.net default setting enables command
echo ).
To eliminate the double characters, turn off software command echo .
!
To repeat the last command, type [
A/
]. (No AT prefix is needed for this command.)
!
The omni.net supports either verbose result code (i.e. OK) or numerical result code (i.e.
0). You can use [ATVn] command to set it one way or the other:
AT Command Description
ATV0 Select numerical result code
ATV1 Select verbose result code
Table 21. At Commands for numberical/verbose result code