Omni 56K USB Lite
TCP/IP
C
•
If you know your DNS server IP address(es), type them in the
Preferred DNS server
and
Alternate DNS server
fields. If you have previously configured DNS servers, click
Advanced
and
then the
DNS
tab to order them.
5.
Click
Advanced
:
•
If you do not know your gateway's IP address, remove any previously installed gateways in the
IP
Settings
tab and click
OK
.
6.
Click
OK
to save and close the
Internet Protocol (TCP/IP) Properties
window.
7.
Click
OK
to close the
Local Area Connection Properties
window.
8.
Turn on your Prestige and restart your computer (if prompted).
Verifying TCP/IP Properties
1.
Click
Start
,
Programs
,
Accessories
and then
Command Prompt
.
2.
In the
Command Prompt
window, type "ipconfig" and then press
ENTER
. The window will display
information about your connection-specific DNS suffix, IP Address, Subnet Mask and Default Gateway.
Setting up Your Windows XP Computer
Configuring TCP/IP
1.
Click
start
,
Control Panel
,
Network and Internet Connections
and then
Network Connections
.
2.
Right-click the network connection you want to configure and then click
Properties
.
3.
Under the
General
tab, select
Internet Protocol (TCP/IP)
(you may need to scroll down) and click
Properties
.
4.
The
Internet Protocol TCP/IP Properties
window opens.
•
If you have a dynamic IP address click
Obtain an IP address automatically
.
•
If you have a static IP address click
Use the following IP Address
and fill in the
IP address
,
Subnet mask
, and
Default gateway
fields. To configure advanced static address settings for a local
area connection, click
Advanced
, and do one or more of the following to configure additional IP
addresses:
In the
IP Settings
tab, in
IP addresses
, click
Add
.
In
TCP/IP Address
, type an IP address in
IP address
and a subnet mask in
Subnet mask
, and
then click
Add
.
Repeat the above two steps for each IP address you want to add.
Configure additional default gateways in the
IP Settings
tab by clicking
Add
in
Default
gateways
.