![ZyXEL Communications NWA1123-ACv2 Скачать руководство пользователя страница 33](http://html1.mh-extra.com/html/zyxel-communications/nwa1123-acv2/nwa1123-acv2_user-manual_945928033.webp)
Chapter 3 Dashboard
NWA1123-ACv2 User’s Guide
33
Boot Status
This field displays details about the NWA’s startup state.
OK
- The NWA started up successfully.
Firmware update OK
- A firmware update was successful.
Problematic configuration after firmware update
- The application of the
configuration failed after a firmware upgrade.
System default configuration
- The NWA successfully applied the system default
configuration. This occurs when the NWA starts for the first time or you intentionally
reset the NWA to the system default settings.
Fallback to lastgood configuration
- The NWA was unable to apply the startup-
config.conf configuration file and fell back to the lastgood.conf configuration file.
Fallback to system default configuration
- The NWA was unable to apply the
lastgood.conf configuration file and fell back to the system default configuration file
(system-default.conf).
Booting in progress
- The NWA is still applying the system configuration.
Management
Mode
This shows whether the NWA is set to work as a stand alone AP.
Power Mode
This displays the NWA’s power status.
Full
- the NWA reveives power using a power adaptor and/or through a PoE switch/
injector using IEEE 802.3at PoE plus.
Limited
- the NWA reveives power through a PoE switch/injector using IEEE 802.3af
PoE even when it is also connected to a power source using a power adaptor.
When the NWA is in limited power mode, the NWA throughput decreases and has just
one transmitting radio chain.
It always shows
Full
if the NWA does not support power detection. At the time of
writing, only the WAC6500 series APs support the power detection feature.
Interface Status
Summary
If an Ethernet interface does not have any physical ports associated with it, its entry is
displayed in light gray text. Click the
Detail
icon to go to a (more detailed) summary
screen of interface statistics.
Name
This field displays the name of each interface.
Status
This field displays the current status of each interface. The possible values depend on
what type of interface it is.
Inactive
- The Ethernet interface is disabled.
Down
- The Ethernet interface is enabled but not connected.
Speed / Duplex
- The Ethernet interface is enabled and connected. This field displays
the port speed and duplex setting (
Full
or
Half
).
VID
This field displays the VLAN ID to which the interface belongs.
IP Addr/
Netmask
This field displays the current IP address and subnet mask assigned to the interface. If
the IP address is 0.0.0.0, the interface is disabled or did not receive an IP address and
subnet mask via DHCP.
If this interface is a member of an active virtual router, this field displays the IP address
it is currently using. This is either the static IP address of the interface (if it is the
master) or the management IP address (if it is a backup).
IP Assignment
This field displays how the interface gets its IP address.
Static
- This interface has a static IP address.
DHCP Client
- This interface gets its IP address from a DHCP server.
Table 11
Dashboard (continued)
LABEL
DESCRIPTION
Содержание NWA1123-ACv2
